If the machine is not in safe conditions, it will be rejected.

For safe we mean that primary parts are not used.

At this point, the machine is positioned in the testing department where the electric system, the hydraulic system and the general conditions are checked: all the used parts as bearings, witon filters, resistors, floats, electric valves are changed.

After all the tests the machine is disassembled and enameled with epoxy paints.

After the enamening the machine is reassembled and tested again and then is packed with its accessories, an identification-plate with number of series, year of overhaul is applied on the car, and then the machine is sent with its guarantee of 12 months.

The guarantee declares our product quality.